A crane mounted on a truck carrier provides the mobility for this type of crane. This crane has two parts: the carrier, often referred to as the Lower, and the lifting component which includes the boom, referred to as the Upper. These are mated together through a turntable, allowing the upper to swing from side to side. These modern hydraulic truck cranes are usually single-engine machines, with the same engine powering the undercarriage and the crane. The upper is usually powered via hydraulics run through the turntable from the pump mounted on the lower. In older model designs of hydraulic truck cranes, there were two engines. One in the lower pulled the crane down the road and ran a hydraulic pump for the outriggers and jacks. The one in the upper ran the upper through a hydraulic pump of its own. Many older operators favor the two-engine system due to leaking seals in the turntable of aging newer design cranes.
1,Crane capacity from 2Ton to 25Ton , include boom crane and Jib crane ,crane can be located at rear of cabin or rear of cargo according to customer requiremetns.
We also can sell crane only to install it on customer's chassis ,we can provide you drawing and other necessary information for installation .
crane brand like CLW , SANY-PALFINGER, SHIMEI, UNIC,etc .
2,Chassis can be choose others like FAW , ISUZU , SINOTRUCK, FOTON , JAC , JMC ,SHACMEN ,NORTH BENZ , ETC ,
3, cargo dimension is according to customer requirements and chassis .
3, Warranty period is 8000KM or 12 month which comes first .
4,so if you have such requirements ,please contact me with TM:truck2011 or cell phone 86-13872885121 .
specification of 4x2 mobile crane truck 6T truck lorry crane telescopic crane truck:
6.3Ton Telescopic arm Crane specification
Photo 4x2 mobile crane truck 6T truck lorry crane telescopic crane truck
certificate of factory :
FAQ:
LC terms is also can be accepted .
Fuel tanker trailer:15-20days
Garbage truck:15 days
Sweeper road truck:25 days
Wecker truck:7-10 days
Suction sewage/Fecal truck:7-15 days
Crane truck:15 days
Refrigerator/Van truck:7-15 days
Dump truck:20 days
Concrete mixer truck:7-25 days
LPG :20-30 days
LED truck:7-15 days
(the above is left hand drive chassis ,if you need the right hand drive chassis ,delivery time is longer than Left hand drive truck,Detailed clauses are subject to contract .)
We have been in this line for over 15 years, dealing with all kinds of special trucks and trailers.
1,Crane capacity from 2Ton to 25Ton , include boom crane and Jib crane ,crane can be located at rear of cabin or rear of cargo according to customer requiremetns.
We also can sell crane only to install it on customer's chassis ,we can provide you drawing and other necessary information for installation .
crane brand like CLW , SANY-PALFINGER, SHIMEI, UNIC,etc .
2,Chassis can be choose others like FAW , ISUZU , SINOTRUCK, FOTON , JAC , JMC ,SHACMEN ,NORTH BENZ , ETC ,
3, cargo dimension is according to customer requirements and chassis .
3, Warranty period is 8000KM or 12 month which comes first .
4,so if you have such requirements ,please contact me with TM:truck2011 or cell phone 86-13872885121 .
specification of 4x2 mobile crane truck 6T truck lorry crane telescopic crane truck:
Vehicle | model | CLW5161JSQT3 | ||
Overall dimension(mm) | 9000,8500×2490×3600,3720 | |||
GVW(Kg) | 15800 | |||
Curb weight(Kg) | 8105,8755 | |||
Max speed(km/h) | 80 | |||
Chassis | Chassis model | EQ5160GKJ1 | ||
Approach/departure angle | 32/15,32/18 | |||
Front/rear overhang(mm) | 1250/2650,1250/2550 | |||
Engine model | B190 33 | |||
Engine manufacture | cummins | |||
Displacement(ML) | 5900 | |||
Power(KW) | 140 | |||
Cargo dimension(mm) | 5300×2294×550 | |||
Fuel | Diesel | |||
Wheel no | 2 | |||
Wheel base | 4700 | |||
Tyre No | 6 | |||
Tyre model | 9.00-20 | |||
suspension | 9/10+8 | |||
Axle | Front | 3.6Ton | ||
Rear | 9Ton | |||
Gearbox | 8JS85E | |||
Frame | 300mm | |||
Cabin | Dongfeng 153 Cabin ,G type | |||
Standard | 2 front outtriger ,operation arm is at left side of truck | |||
Crane | Model | SQ6.3SK2 | ||
Max lifting capacity(kg) | 6300 | |||
Max monmnent(T.M) | 15.7 | |||
Rotation angle | 360 degree | |||
Lifting capacity(kg/m) | 6300/2.5, 2900/3.82, 1600/6.17, 1200/8.05 | |||
Fixture | For brick clamping purpose | |||
Option | High operation seat , 2 rear outtriger |
6.3Ton Telescopic arm Crane specification
Crane model | SQ6.3SK2Q | unit |
Max Lifting Capacity | 6300 | kg |
Max Lifting Moment | 15.7 | T.M |
Recommend Power | 20 | kw |
Max Oil Flow of Hydraulic System | 40 | L/min |
Max Pressure of Hydraulic System | 20 | MPa |
Oil Tank Capacity | 90 | L |
Rotation Angle | All Rotation | |
Crane Weight | 2160 | kg |
Installation Space | 900 | mm |
Lifting height | 11 | m |
Working radius | 9 | m |
Photo 4x2 mobile crane truck 6T truck lorry crane telescopic crane truck
certificate of factory :
FAQ:
Q1. Quality control
A:We make quality control for each step while producing and before shipping.
Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.
LC terms is also can be accepted .
Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.DAP etc .
Q4. How about your delivery time?
A: Generally, it will take 10 to 20 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
For standard products, delivery time is as below:
Water tanker truck:7 daysFuel tanker trailer:15-20days
Garbage truck:15 days
Sweeper road truck:25 days
Wecker truck:7-10 days
Suction sewage/Fecal truck:7-15 days
Crane truck:15 days
Refrigerator/Van truck:7-15 days
Dump truck:20 days
Concrete mixer truck:7-25 days
LPG :20-30 days
LED truck:7-15 days
(the above is left hand drive chassis ,if you need the right hand drive chassis ,delivery time is longer than Left hand drive truck,Detailed clauses are subject to contract .)